[. . . ] ?????????? Thank you for purchasing the Yamaha Carrying Holder for Marching Bells and Xylophones. Securely tighten all screws after adjusting the instrument?s position. [. . . ] When tilting the instrument up or returning it to the playing position, keep your hands away from the areas marked A as shown in the illustration. ?????Accessories ?????? Hexagonal Wrench ?4mm ZN39960 R0 Printed in Japan ???????ASSEMBLY PROCEDURE 1 ???????????????Carrying Holder Setup MKH-9200(S) ?MBL-32A, 832A MXL-32A, 32AF 2 ??????????Attach the Instrument ???????????????????????????????????? First adjust the bracket position to a comfortable fit. ????????????????????? Attach the arms that are supplied with the Multi Toms. Use a hex wrench to loosen the four screws A on the carrier frame so that the ?Set the carrier frame on the instrument, as shown in the illustration below, and slide Loosen ???? Tighten the brackets on the carrier frame so that they align with the carrier mounting plates on the bottom of the instrument. Use the four fixing bolts B on the brackets to attach the carrier frame to the instrument. * If you are having trouble reattaching the carrier frame after it has been removed, go through the same procedure as described above. ??????????? Carrier Frame Carrier mounting plate ?????????????3?????2???MKH-9200S: 2??) ???????? Brackets with wing bolts One of three or two bracket mounting positions can be selected. (MKH-9200: 3 positions , MKH-9200S: 2 positions) 3????2?? 3 or 2 positions ???????? Fixing wing bolt B B A A ???????? ???????? Pivot holder Fixing wing bolt B B A A ???????ASSEMBLY PROCEDURE 3 ?????????Arm Position Setup ??????????????????????? [. . . ] ????????????????? To adjust for a comfortable playing height, loosen the arm screws D and raise or lower the arms as required. After adjustment, securely tighten the screws using the Allen wrench provided. [. . . ]